Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pumps/Inflation

XLAB X-Nut Inflation Holder
$23.00
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
Vittoria Pit Stop Tire Sealant
$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Silca EOLO III CO2 Regulator ONLY
$26.00
In 1982 SILCA developed the first regulated CO2 inflator. As Claudio himself explained, "Before EOLO, you had to turn the cartridge and pray!" Giving the user the ability to regulate the flow of gas into the tire was the key to the widespread adoption of compressed gas for roadside use. EOLO III builds on the SILCA tradition by using an ultra-precise spool valve design with a light-action spring to give the user perfect control of the flow into the tire. The full metal construction of the EOLO III contains no plastic parts and is manufactured entirely from 6063 series aluminum and stainless steel. Hardened tool steel puncture pin is more than 2X the hardness of traditional puncture pins to ensure smooth operation in all conditions over many years. - 6063 series aluminum body with Red-White-Green Insulators - Lightest spring action of any spring-valve regulator - Hardened tool steel puncture pin - 'Camera-lens' style valve head allows for easy installation even in disc wheels
Silca Locking Schrader Chuck
$20.00
Lever-locking design quickly attaches and forms a tight seal on all Schrader valves. Per Josh: "I first saw this type of chuck while traveling in Vietnam a few years ago. Throughout Vietnam you find tire repair stations along the roadside, and I was continually amazed to see them use large tire irons to manually install truck and car tires, often having 2 or 3 people stand on the tire sidewall while another person used the lever to pull those last few inches of bead over the rim. Then I watched as they attached the locking Schrader chuck onto the valve, placed the entire wheel around the corner of the building, and inflated it from the other side of the wall! When I inquired about the chuck with the shop owner he told me 'Expensive, but worth it!' as it allowed his employees to inflate truck tires to very high pressures from a safe distance. I wanted to bring that same simplicity to the market. - Environmentally friendly electroless nickel-plated brass and stainless steel construction - Fits all 1/4 and 6mm pneumatic hose - Connects much faster than thread on type chucks and disconnects instantly with no air loss from the valve
Silca Tattico Bluetooth Mini-Pump
$125.00
Typical mini-pump gauges have issues of accuracy and size. The gauge can't be so big that it feels bulky in a jersey pocket nor can it be too small to read. Much like a high-end watch, the internal mechanism of an accurate pump gauge consists of a variety of small, precision parts with precise movements. Also similar to a watch, the internal components of a floor pump gauge are already very small in size. As we looked at creating a gauge small enough to mount on a mini-pump, we found that as the overall size of the gauge decreased, the internal mechanism needed to be simplified and therefore accuracy decreased rapidly. This leaves traditional mini-pump gauges generally being barely more accurate than squeezing the tire with your fingers. Tattico Bluetooth embeds a Bluetooth-enabled pressure transducer inside of our award-winning Tattico mini-pump, allowing you to live read large-scale, pressures accurate to 1% on your Apple or Android device any time, any place. - Seamless connection to iGauge mobile app for clear, accurate pressure reading - 6061 Alloy barrel and gripping surfaces - High-efficiency piston design - Long extractable filler hose with locking Presta/Schrader chuck - Maximum pressure 120psi - 9-1/2" length - Includes direct-mount backed with retaining strap - Easily replaceable CR2032 battery
Silca Thread-on Schrader Chuck
$12.00
This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass
Prestacycle Alloy CO2 Pump
$24.95
Prestacycle Alloy CO2 Pump is NOT a complete pump. Roughly the size of a CO2 cartridge and much lighter weight, this is your LAST CO2 cartridge. Simply attach it to your CO2 head, open the valve and pump! Eliminate CO2 range anxiety without having to carry a whole pump. If you use CO2, another pump head would be redundant. Capable of reaching 120+ psi, this is not the fastest pump, but a whole lot faster than walking. CO2 head required, not included. - Replace your spare CO2 Cartridge with a backup that never runs out - Same overall space as a CO2 Cartridge, and much lighter - Use your CO2 Head. No need to waste space and weight with a full pump - Compatible with Many Heads. (Push to inflate heads must be held open) - Engineered with a compression ratio to easily reach 120psi - End CO2 range anxiety, So much faster than walking! - Only 111mm (4.4?) by 20mm (0.8?) diameter - Weighs only 35 grams! - CO2 Head required, NOT INCLUDED - Presta ONLY. Most CO2 Heads only work on Schrader valves with high Cartridge pressure. Features: The ENDLESS spare CO2 Cartridge! The Prestacycle Alloy CO2 pump is the end of CO2 range anxiety. CO2 is great for fast, high pressure fill-ups, however, when you’re out, you’re out of luck! You can carry as many Cartridges as you think you need, now your last one can be endless. Same space as a cartridge, but lighter. CO2pump takes about the same space as a cartridge, but weighs only 35 grams. Unlike pumps, why waste space and weight to carry a pump head? Your CO2 Head is already a pump head with CO2pump. Although small, CO2pump is engineered to service high pressure. We designed a tiny pump with a compression ratio that enables you to reach 120psi without straining. With our design, smaller simply means more strokes, not a lack of pressure. Compatible with most brands of CO2 Heads*. Got a favorite CO2 Head? Already own one? CO2pump works great with most Heads. Simply attach the pump like a cartridge, open the valve and start pumping. *If your Head is a push-to-inflate head, you will need to hold the “push” action open while pumping. CO2pump is so much faster – than walking. No matter what goes wrong, inflation will not be the problem that keeps you flat. CO2pump will get you back on the road. Specifications: - Replace your spare CO2 Cartridge with a backup that never runs out - Same overall space as a CO2 Cartridge, and much lighter - Use your CO2 Head. No need to waste space and weight with a full pump - Compatible with Many Heads. (Push to inflate heads must be held open) - Engineered with a compression ratio to easily reach 120psi - End CO2 range anxiety, So much faster than walking! - Only 111mm (4.4?) by 20mm (0.8?) diameter - Weighs only 35 grams! - CO2 Head required, NOT INCLUDED Disclaimers CO2 Head required, not included. Compatible with most brands of CO2 Heads. Note: push to inflate heads need to be held in the inflate position while pumping.
Prestacycle Prestaflator Micro CO2 Bicycle Inflation Tool
$16.95
The new Standard in light, reliable inflation! Prestaflator Micro is a superlight CO2 inflation head and more! We've combined technologies to make a head 33% lighter than any other major brand, and provides secure, leak-free connection with the greatest possible inflation control! The Cartridge is the flow control Knob The best way to inflate CO2 is with a variable flow knob. The bigger the knob, the better the flow control. Prestacycle introduces it's revolutionary design – the Cartridge is the Knob! Save weight, size and complexity with our design. Secure, no-loss connection. Prestaflator Micro uses a threaded Presta / Schrader head. Secure attachment with a perfect seal insures you don't loose any CO2. 100% of the cartridge contents will go towards inflation Easy operation You can install the cartridge first, or put the head on the valve first. Prestaflator Micro works perfectly either way. When you screw the cartridge onto the head – NO CO2 will flow. There is no-loss from installing the cartridge. To inflate, Slightly un-screw the cartridge, and inflation begins. The more you unscrew, the faster it flows. Works great – even for seating tubeless tires. If you close the cartridge again, flow stops completely. If you leave the cartridge on, it will retain the contents for an extended period of time. Specifications: - 33% Lighter and smaller than any major brand - The Cartridge is the Knob! - Turn Cartridge (instead of a knob) for precise flow control - Secure Presta / Schrader Threaded head prevents loss - Only 12 grams weight! - Precision Machined alloy for long life - Compatible with CO2Pump for a 48 gram total Pump option! - Compatible with our Compressor Adapter for unlimited inflation!
Planet Bike Red Zeppelin CO2 Inflator Head
$11.99
You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."
Park Tool Emergency Tire Boot
$4.95
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Park Tool Pump Rebuild Kit (for PFP-3, PFP-6, and PFP-8)
$6.00
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
Park Tool Super Patch Kit (Carded)
$4.95
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Park Tool Vulcanizing Patch Kit
$4.95
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
Lezyne ABS-1 Pro HP Chuck
$18.99
Upgraded and redesigned for Year 11, Lezyne's ABS1 Pro further advances our classic Flip-Thread Chuck system. It features a 90° design for enhanced function and usability. The highly durable construction is built using machined aluminum and composite matrix materials, with an extremely robust and fluid brass swivel. The chuck quickly “flips” for Presta or Schrader valves and threads on for superior engagement. An integrated Presta valve-core wrench completes the system, providing easy valve core tightening or removal for tubeless systems.
Lezyne Composite Matrix Pump Mount HP
$6.99
Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.
Lezyne Sport Drive HP
$20.00 - $20.99
Lezyne's lightweight, powerful Sport Drive HP mini-pump quickly inflates your tires so you can get back on your bike. Its aluminum barrel and overlapping handle help you get pumped up to 120 psi in a flash. And, making your inflation experience even easier is a Presta/Schrader-compatible hose that stows inside the handle when not in use.
Lezyne Sport Drive HV
$21.00
Lezyne's lightweight, powerful Sport Drive HV mini-pump quickly inflates your mountain bike tires so you can get back ro pedaling. Its oversize aluminum barrel and no-slip Composite Matrix handle help you get pumped up to 90 psi in a flash. And making your inflation experience even easier is a Presta/Schrader-compatible hose that stows inside the handle when not in use.
Lezyne Sport Floor Drive
$60.00
The Sport Floor Drive floor pump features a steel barrel and piston with a tough composite matrix base for years of reliable use. Its oversized 3.5-inch gauge makes reading the pressure a breeze. - Extra-long, high-strength hose with composite matrix couplers - Durable, painted finish with varnished wood handle - Standard height - 220 psi max
Lezyne Twin Speed Drive CO2
$16.99 - $20.00
Lezyne's convenient Twin speed Drive CO2 inflator is compact and lightweight. Its aluminum head is compatible with both Presta and Schrader valves, and uses a simple twisting action for easy inflation. And, it accepts all threaded CO2 cartridges.
Genuine Innovations Microflate Nano
$20.00 $21.19 6% Off
Easy to use, easy to control and affordable. The Mircoflate Nano gives you the best bang for your buck when it comes to quality and ease of use. Simply thread on your favorite CO2 cartridge, twist the cartridge off slightly to engage inflation and tighten it back on to shut it off. Petite power! - Compact and nearly indestructible - Easy to use and fully controllable - Patented twist-to-inflate technology - Press on to both Schrader and Presta valves - Compatible with 16 gram, 20 gram and 25 gram threaded CO2 cartridges Product includes: (1) Microflate Nano inflator head (1) threaded 20 gram CO2 cartridge
Cannondale Essential Floor Pump
$40.00
Stay pumped. An incredibly easy-to-use gauge is paired with a stable base and durable body for an ideal go-to pump for inflating any bicycle tire. Where it thrives: In the garage What it's built for: Efficiency, Stability Highlights: - Tough steel base, durable barrel / extra-large 5" (130mm) gauge offers increased readability - Recommended pressure ranges help select suitable tire pressure - AutoSelect head adjusts to Schrader and Presta valves
Blackburn Core 3 Floor Pump
$70.00
Perfect Pressure. Every Ride. At nearly 28 inches tall, the Core 3 towers over most floor pumps. The 48-inch-long hose is long enough to get air pressure to anywhere you could need it. Like the Pro, the Core 3 features our AirTap head that fits Schrader/Presta/Dunlop valves and has a pressure bleed button built in. We also integrated the easy to read, 3-inch gauge into the massive steel base of the Core 3 to help it have a rock solid stance. - Dimensions: 5.5 x 9 x 26.25 inches Airtap Core Pump Head - Our AirTap reversable pump head works with Schrader, Presta or Dunlop valves and features an integrated air bleed button right at the valve for perfect pressure, every time. Aviation Guage - The 2.5-inch-wide base-mounted gauge lets you easily read your tire pressure, and adds to the footprint of the Core 2 pump's solid stance. Steel is real, strong - The base and barrel of the Core 3 are constructed of steel to withstand a lifetime of (ab)use. Air Bleed - Button on the pump head to micro-adjust pressure.
Page 1 of 1