Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pumps/Inflation

XLAB X-Nut Inflation Holder
$23.00
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
Vittoria Pit Stop Tire Sealant
$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Silca Thread-on Schrader Chuck
$12.00
This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass
Silca Locking Schrader Chuck
$20.00
Lever-locking design quickly attaches and forms a tight seal on all Schrader valves. Per Josh: "I first saw this type of chuck while traveling in Vietnam a few years ago. Throughout Vietnam you find tire repair stations along the roadside, and I was continually amazed to see them use large tire irons to manually install truck and car tires, often having 2 or 3 people stand on the tire sidewall while another person used the lever to pull those last few inches of bead over the rim. Then I watched as they attached the locking Schrader chuck onto the valve, placed the entire wheel around the corner of the building, and inflated it from the other side of the wall! When I inquired about the chuck with the shop owner he told me 'Expensive, but worth it!' as it allowed his employees to inflate truck tires to very high pressures from a safe distance. I wanted to bring that same simplicity to the market. - Environmentally friendly electroless nickel-plated brass and stainless steel construction - Fits all 1/4 and 6mm pneumatic hose - Connects much faster than thread on type chucks and disconnects instantly with no air loss from the valve
Silca EOLO III CO2 Regulator ONLY
$26.00
In 1982 SILCA developed the first regulated CO2 inflator. As Claudio himself explained, "Before EOLO, you had to turn the cartridge and pray!" Giving the user the ability to regulate the flow of gas into the tire was the key to the widespread adoption of compressed gas for roadside use. EOLO III builds on the SILCA tradition by using an ultra-precise spool valve design with a light-action spring to give the user perfect control of the flow into the tire. The full metal construction of the EOLO III contains no plastic parts and is manufactured entirely from 6063 series aluminum and stainless steel. Hardened tool steel puncture pin is more than 2X the hardness of traditional puncture pins to ensure smooth operation in all conditions over many years. - 6063 series aluminum body with Red-White-Green Insulators - Lightest spring action of any spring-valve regulator - Hardened tool steel puncture pin - 'Camera-lens' style valve head allows for easy installation even in disc wheels
Silca Pocket Impero
$125.00
Heat is the enemy of mini-pumps. More strokes generate more friction which produces more heat—and heat is wasted energy.  Unlike most mini-pumps, Pocket Impero does not suffer from efficiency loss when hot.  Pocket Impero is between a high-pressure and high-volume pump. At 200 strokes the Pocket Impero reaches higher pressures than any other pocketable pump ever tested in the BikeRadar test protocol, meaning that it is pushing more air with fewer losses than pumps of either high-pressure or high-volume designs. The unique Slide-Lock Silicone sleeve improves grip and doubles as a handle lock when in your pocket. - Full alloy construction with CNC alloy head - Premium leather piston gasket and brass check-valve - Slide-Lock Silicone sleeve - Length: 8 in (20.3cm) - Weight: 5.3 oz (150gm) - Pressure at 200 strokes (BikeRadar protocol): 89psi - Warranty: Silca Shield, 25 year hard parts warranty
Silca Tattico Bluetooth Mini-Pump
$125.00
Typical mini-pump gauges have issues of accuracy and size. The gauge can't be so big that it feels bulky in a jersey pocket nor can it be too small to read. Much like a high-end watch, the internal mechanism of an accurate pump gauge consists of a variety of small, precision parts with precise movements. Also similar to a watch, the internal components of a floor pump gauge are already very small in size. As we looked at creating a gauge small enough to mount on a mini-pump, we found that as the overall size of the gauge decreased, the internal mechanism needed to be simplified and therefore accuracy decreased rapidly. This leaves traditional mini-pump gauges generally being barely more accurate than squeezing the tire with your fingers. Tattico Bluetooth embeds a Bluetooth-enabled pressure transducer inside of our award-winning Tattico mini-pump, allowing you to live read large-scale, pressures accurate to 1% on your Apple or Android device any time, any place. - Seamless connection to iGauge mobile app for clear, accurate pressure reading - 6061 Alloy barrel and gripping surfaces - High-efficiency piston design - Long extractable filler hose with locking Presta/Schrader chuck - Maximum pressure 120psi - 9-1/2" length - Includes direct-mount backed with retaining strap - Easily replaceable CR2032 battery
Silca Pista Floor Pump
$149.00
Originally designed in the 1950s when the Bianchi-Pirelli team requested a pump that could fit under the rear seat of the Fiat team car, the Pista pump quickly became an icon of professional team cars and mechanic workstations at 6-Day track events around the world. The compact form of the pump, and the ability to lay completely flat, allow the pump to take up minimal space in a trunk, duffel bag, or larger tool kit, making it a true icon of the sport amongst the cycling cognoscenti. In 2017, we took all of the qualities of the original Pista and introduced a re-engineered, limited-edition version of the pump with the iconic Molteni orange barrel to celebrate 100 years in business. These modern orange pumps were initially meant to be a limited-release product to celebrate our heritage, but the positive response and demand for the product have continued. As we're now in our second century of making high-performance pumps, we're pleased to make Pista part of our permanent floor pump line-up and will offer it in a modern red livery moving forward. - Durable, high-strength steel barrel - Compact ash wood handle with hose guides - High-efficiency SILCA leather piston assembly - Brass check-valve assembly - Long filler hose with integrated Schrader chuck - Push-on alloy Presta chuck with bleeder valve - Rated to 220psi
Planet Bike Red Zeppelin CO2 Inflator Head
$11.99
You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."
Park Tool Emergency Tire Boot
$4.95
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Park Tool Super Patch Kit (Carded)
$4.95
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Park Tool Vulcanizing Patch Kit
$4.95
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
Park Tool Pump Rebuild Kit (for PFP-3, PFP-6, and PFP-8)
$6.00
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
Lezyne Composite Matrix Pump Mount HP
$6.99
Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.
Lezyne Twin Speed Drive CO2
$16.99 - $20.00
Lezyne's convenient Twin speed Drive CO2 inflator is compact and lightweight. Its aluminum head is compatible with both Presta and Schrader valves, and uses a simple twisting action for easy inflation. And, it accepts all threaded CO2 cartridges.
Lezyne ABS-1 Pro HP Chuck
$18.99
Upgraded and redesigned for Year 11, Lezyne's ABS1 Pro further advances our classic Flip-Thread Chuck system. It features a 90° design for enhanced function and usability. The highly durable construction is built using machined aluminum and composite matrix materials, with an extremely robust and fluid brass swivel. The chuck quickly “flips” for Presta or Schrader valves and threads on for superior engagement. An integrated Presta valve-core wrench completes the system, providing easy valve core tightening or removal for tubeless systems.
Lezyne Sport Drive HP
$20.00 - $20.99
Lezyne's lightweight, powerful Sport Drive HP mini-pump quickly inflates your tires so you can get back on your bike. Its aluminum barrel and overlapping handle help you get pumped up to 120 psi in a flash. And, making your inflation experience even easier is a Presta/Schrader-compatible hose that stows inside the handle when not in use.
Lezyne Sport Floor Drive
$59.99
The Sport Floor Drive floor pump features a steel barrel and piston with a tough composite matrix base for years of reliable use. Its oversized 3.5-inch gauge makes reading the pressure a breeze. - Extra-long, high-strength hose with composite matrix couplers - Durable, painted finish with varnished wood handle - Standard height - 220 psi max
Lezyne Sport Gravel Drive 3.5
$69.99
- Mid-volume steel barrel and piston with composite matrix base - Precision 3.5-inch gauge (100 psi / 6.89 bar) - Extra long, high-strength hose - Varnished wood handle - ABS1 Pro with Presta/Schrader valve chuck
Lezyne CNC Travel Floor Drive Pump
$99.99
The ultimate travel floor pump. Compact, lay-flat design maximizes efficiency and portability. Durable and lightweight CNC machined aluminum construction. Felt-lined canvas bag protects pump during transport. Durable, anodized high-polish finish with a compact 1.5-inch gauge. ABS Flip-Thread Chuck equipped with Speed Chuck adapter. Features - Compact, flat laying design - CNC machined aluminum construction - Durable anodized high-gloss finish - Compact 1.5-inch gauge (160 psi / 11 bar) - ABS Flip-Thread chuck. - Canvas bag included Specs - Weight: 0.84kg | 1.85lbs - Max: 160psi | 11bar - Size: 50.8 x 19 x 60cm
Genuine Innovations Microflate Nano
$21.19
Easy to use, easy to control and affordable. The Mircoflate Nano gives you the best bang for your buck when it comes to quality and ease of use. Simply thread on your favorite CO2 cartridge, twist the cartridge off slightly to engage inflation and tighten it back on to shut it off. Petite power! - Compact and nearly indestructible - Easy to use and fully controllable - Patented twist-to-inflate technology - Press on to both Schrader and Presta valves - Compatible with 16 gram, 20 gram and 25 gram threaded CO2 cartridges Product includes: (1) Microflate Nano inflator head (1) threaded 20 gram CO2 cartridge
Cannondale Essential Floor Pump
$40.00
Stay pumped. An incredibly easy-to-use gauge is paired with a stable base and durable body for an ideal go-to pump for inflating any bicycle tire. Where it thrives: In the garage What it's built for: Efficiency, Stability Highlights: - Tough steel base, durable barrel / extra-large 5" (130mm) gauge offers increased readability - Recommended pressure ranges help select suitable tire pressure - AutoSelect head adjusts to Schrader and Presta valves
Cannondale Precise Floor Pump
$60.00
Stay pumped. Perfect for multi-bike households, a massive dual-stage gauge, bleed valve, and suggested pressure ranges assures the correct pressure. Where it thrives: Multi-bike household What it's built for: Efficiency, Versatility Highlights: - Grippy footholds, ergonomic handle / auto dual-stage, extra-large 5" (130mm) gauge for unbeatable readability and accuracy - Recommended pressure ranges help select ultra-accurate tire pressure / bleed valve for quick-and-easy pressure adjustments - AutoSelect head adjusts to Schrader and Presta valves
Blackburn Core 2 Floor Pump
$45.00
Inexpensive Doesn't Mean Cheap. The Core 2 pump still shares all the techy bits of its big siblings but is built for folks operating on a smaller budget. The AirTap head will function with Schrader/Presta/Dunlop valves and has an integrated bleed valve for dialing in your pressure. Our aviation-style gauge is 2.5 inches wide, and easy to read. It's also built into the base to add to the stability of the Core 2 during use. Whether you are in the basement, the garage or at the trail head, the Core 2 has you covered. - Dimensions: 4.25 x 9 x 24 inches Airtap Core Pump Head - Our AirTap reversable pump head works with Schrader, Presta or Dunlop valves and features an integrated air bleed button right at the valve for perfect pressure, every time. Aviation Guage - The 2.5-inch-wide base-mounted gauge lets you easily read your tire pressure, and adds to the footprint of the Core 2 pump's solid stance. Air Bleed - Button on the pump head to micro-adjust pressure.
Blackburn Core 3 Floor Pump
$70.00
Perfect Pressure. Every Ride. At nearly 28 inches tall, the Core 3 towers over most floor pumps. The 48-inch-long hose is long enough to get air pressure to anywhere you could need it. Like the Pro, the Core 3 features our AirTap head that fits Schrader/Presta/Dunlop valves and has a pressure bleed button built in. We also integrated the easy to read, 3-inch gauge into the massive steel base of the Core 3 to help it have a rock solid stance. - Dimensions: 5.5 x 9 x 26.25 inches Airtap Core Pump Head - Our AirTap reversable pump head works with Schrader, Presta or Dunlop valves and features an integrated air bleed button right at the valve for perfect pressure, every time. Aviation Guage - The 2.5-inch-wide base-mounted gauge lets you easily read your tire pressure, and adds to the footprint of the Core 2 pump's solid stance. Steel is real, strong - The base and barrel of the Core 3 are constructed of steel to withstand a lifetime of (ab)use. Air Bleed - Button on the pump head to micro-adjust pressure.
Page 1 of 1