This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum
With a 45mm deep Indianapolis-made carbon rim, optimized for low aerodynamic drag and precise handling in all riding conditions, the 302 Carbon Clincher delivers the ride that Zipp wheels are renowned for at a price that makes Zipp carbon quality and performance more attainable than ever. The 302’s smooth carbon rim is hand assembled to Zipp’s new 76/176 hubs using Belgian CX-Sprint spokes and brass spoke nipples to build a wheel that is both fast and reliable—tough enough to survive the Spring Classics or the road less traveled, yet light enough to tackle the steepest grades. The 76/176 hubset’s axle end caps and rear freehub can be removed without tools for quick and easy cleaning and lubrication. Additionally the J-bend spoke design allows for easy sourcing of replacement spokes. And like all of Zipp's carbon clinchers, the rim bed of the 302 is designed to make installing and removing tires fast and easy. Experience Zipp speed with the 302. Each 302 Rim-Brake Wheel Includes: - Zipp valve extenders - Zipp rim tape - Zipp Tangente quick-release skewers
With a 45mm deep rim optimized for low aerodynamic drag and predictable handling in all riding conditions, the 302 achieves this at a price point that makes Zipp carbon quality and performance more attainable than ever. The 302’s Indianapolis-made smooth carbon rim is mated to Zipp's J-bend hubs to assemble a wheel that is both fast and reliable. Assembled by hand in Indianapolis with 20 Belgian Sapim CX-Sprint spokes up front and 24 out back, the 302 is equally suited to training rides or duking it out at your local criterium series. - Rim shape optimized for low aerodynamic drag and predictable handling in all riding conditions - Carbon Clincher - J-bend hubset - XDR Driver Body Compatible
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
Help ensure your rotors are not damaged, contaminated in transit, or in storage with this simple solution. This also helps protect anything that may come into contact with the rotor during transport. - Protects rotors during transit - Neoprene cover to protect against water and grease - Reinforced gusset and drawstring to protect the edges of the rotor and to cinch down tightly during transit
$10.80 - $14.00
- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs
125 piece assortment of precision machined axle spacers (0.5mm to 5mm thickness). - Outside Diameter of Spacers: 16mm - Inside Diameter of Spacers: 10mm Kit includes: - (10) - 0.5mm thick spacers - (30) - 1mm thick spacers - (30) - 2mm thick spacers - (25) - 3mm thick spacers - (15) - 4mm thick spacers - (15) - 5mm thick spacers
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs - Type: Solid Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 174mm - 1 axle per bag
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.7mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Ultegra 6400 Front - Shimano 105 HB-5500 Front - Shimano 105 HB-5501 Front - 105 SC 6400 Front
$1.25 - $5.75
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
- Variable widths - Left: 35mm - Center: 52mm - Right: 40.5mm - Length: 127.5mm - Overall: 148.5mm
- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt
• Rim strips for 20-inch fat bike rims • 80mm wide
• 5-sided key locking skewer set • Chromoly axles • 6061 anodized aluminum • Includes seat and F+R wheel skewers • 95g (set)
• Replacement steel quick release skewers
- Replacement rear skewer - Spacing: 135mm - Material: Steel
$15.00 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!
$36.99 - $56.00
- Series: SLX - Disc Rotor Mount: Center Lock Disc - FH-M7000 - Axle Type: QR / thru-axle - Over Locknut: 135 - Axle Diameter: 10 - FH-M7010 - Axle Type: 12mm thru-axle - Over Locknut: 142 - Axle Diameter: 12mm - Spoke Holes: 32H - Spoke Hole Circle: 55/61 - Average Weight: 384g
- Replacement rear wheel skewer. - Specifically designed for use with Saris trainers. - Can be used for both indoor and outdoor rides.
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes
If you need just one wheel for on-the-spot repairs, this wheel features both rim brake and disc brake compatibility.
Touring cyclists have known theses wheels for a decade, noting their durability, simplicity, and ease of service. They're a great choice for all-condition roads.
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
The Problem Solvers Downtube Shift Cable Adjusters replace your existing shift adjusters, or let you add integrated shifters to your current down tube shifter-equipped road bike. Made from durable plastic and stainless steel, these adjusters are built to last for countless miles on your road steed.
Origin-8's Pro Pulsion Rim Strips are made from a super-durable, environmentally friendly PVC material.
• Sealed cartridge bearings • High flange design • 120mm rear hub spacing • Fixed/freewheel hub threading • 32, 36, and 48-hole spoke drilling • Bolt-on 3/8-inch axle • Black and silver
$5.39 - $7.59
- High-quality fat bike rim strips - Super durable PVC material
This new purpose-built wheel system is designed for reliable performance on rough roads and variable terrain. Lightweight, stiff and responsive, it features many of the same technologies as the more expensive Allroad Pro Disc model, including Mavic's new UST Road Tubeless technology. Super-wide rims (22mm internal) give you a smooth ride even on rugged roads and dirt, and you can choose either 30mm or 40mm Yksion Elite Allroad UST tubeless tires. Mavic's proven UST system lets you run lower tire pressure to improve comfort and handling with no risk of pinch flats. And with the wider rims, you can choose tires up to 40mm. The lightweight rims feature ISM 4D technology (Inter Spoke Milling), which strategically removes material from the rim where it’s not needed but keeps it around the spokes, where the tension is applied. This disc-brake specific wheelset features 24 steel spokes front and rear to distribute the brake torque efficiently and evenly. The wheels are compatible with 6-Bolt or Center Lock rotors. The front hub comes with a 12mm thru-axle and can convert to 15mm or quick release. The rear wheel is 12x142 thru-axle and can also convert to quick release.
Page 1 of 26 Next page